Tel: +86 18796667008
Product Categories
Contact Us

Address: No.52 Tuanjie Road, Lingtang Town, Gaoyou,

Jiangsu, China

Export sales: locki.ge

Tel: +86-514-80951655

Fax: +86-514-80951655

Email: locki.ge@ltzm.com

Cell/Whatsapp: +86 17551054038

Skype:locki Ge

News
Home > News > Content

Solar Street Light Advantages And Installation Steps

LONGT Lighting Group Co.,Ltd | Updated: Sep 04, 2017

First, the solar street light brief

Solar Street Light is the use of crystalline silicon solar cell-powered, maintenance-free VRLA battery (colloidal battery) storage of electricity, ultra-bright LED lamps as a light source, and by the intelligent charge and discharge controller control, instead of the traditional public power lighting Street light. No stability, long life, high luminous efficiency, easy installation and maintenance, high safety performance, energy saving and environmental protection, economical and practical advantages. It has the advantages of good stability, long life, high luminous efficiency, easy installation and maintenance, high safety performance, energy saving and environmental protection. Can be widely used in urban main and secondary roads, residential, factories, tourist attractions, parking and other places. Product parts Light pole structure: steel light pole and bracket, the surface spray treatment, the battery board connection with special anti-theft stainless steel screws.

Second, the composition of solar street light system

Solar Street Light system consists of LED light source (including drive), solar panels, batteries (including battery incubator), solar street light controller, street lamp poles (including basic) and accessories wire and other parts. Solar cells generally use single crystal silicon or polycrystalline silicon solar modules; LED lamp head generally use high power LED light source; controller is generally placed in the poles, with light control, time control, overcharge and over discharge protection and reverse protection, more High-level controller with more than four seasons to adjust the lighting time function, half-power function, intelligent charge and discharge functions; the battery is generally placed in the ground or there will be a special battery incubator, can be used to control lead-acid batteries, colloidal batteries, Iron-aluminum batteries or lithium batteries. Solar lamps are fully automatic and do not require trenching, but the poles need to be mounted on the embedded parts (concrete base).

1. The advantages of solar street lights

1. Energy saving: solar energy to provide electricity conversion, inexhaustible;

2. Environmental protection: no pollution, no noise, no radiation;

3. Safety: no electric shock, fire and other accidents;

4. Convenient: simple installation, no need to line or "ripped" dig construction, there is no power to worry about power failure;

5. Long life: high technological content of products, control systems, accessories are international brands, intelligent design, reliable quality;

6. High grade: technology products, green energy, the use of units to attach importance to science and technology, green image enhancement, grade upgrade;

6. Investment: one-time investment and AC equivalent (AC investment from the substation, into the electricity, control box, cable, works), an investment, long-term use;

8. Wide application: solar energy comes from nature, so there are places where sunshine can be used, especially for green landscape lighting equipment, high-grade residential and outdoor lighting, tourist attractions coastal landscape lighting and embellishment, industrial development zone, industrial and mining business street lights , The major institutions of outdoor lighting.

Third, the installation of solar street lights

Foundation pouring

⒈ determine the location of the lamp; survey geological conditions, if the surface 1 m 2 are soft soil, then the excavation depth should be deepened; at the same time to confirm the excavation location below no other facilities (such as cables, pipes, etc.), the top of the street lights for a long time Shade objects, otherwise the appropriate replacement position.

⒉ in the position of the lamp set aside (excavation) meet the standard 1 m 3 pit; The embedded parts are placed in the middle of the square pit, one end of the PVC threading pipe is placed in the middle of the embedded part, and the other end is placed in the battery storage place. Pay attention to keep the embedded parts, the foundation and the original surface in the same level (or the top of the screw and the original surface in the same level, depending on the needs of the venue), one side and the road parallel; this can ensure that the poles stand upright Not skewed. And then to C20 concrete pouring fixed, pouring process to stop the vibration of vibration, to ensure the overall compactness, firmness.

⒊ construction is completed, the timely clean up the residue on the plate residue, and waste oil to clean the impurities on the bolt.

⒋ concrete solidification process, to regular watering conservation; to be completely solidified concrete (usually more than 72 hours), in order to install chandeliers.

Battery pack installation

⒈ solar panel output positive and negative in the connection to the controller before taking measures to avoid shorting;

⒉ solar cell components and stent connection to be solid and reliable;

⒊ components of the output line should be avoided exposed, and tie with tie;

⒋ the direction of the battery components to the south, to the compass point prevail.

Battery installed

⒈ battery placed in the control box to be lightly to prevent smashing control box;

⒉ batteries between the cable must be bolted to the battery terminal and the use of copper gasket to enhance the conductivity;

⒊ output line connected to the battery in any case to prohibit short, to avoid damage to the battery;

⒋ battery output line and the controller within the poles must be connected through the PVC threading tube;

⒌ after the completion of the above, check the controller side of the wiring to prevent short circuit. After normal shut the door of the control box

Lamp installation

⒈ fixed parts of the various components: the sun board fixed in the sun board bracket, the lamp holder fixed to the pick arm, and then the bracket and the arm fixed to the main pole, and the cable into the control box (battery box).

⒉ light pole before lifting, first check the various parts of the fasteners are solid, the lamp is correct installation, light source work is normal. And then in the simple debugging system work is normal; release the controller on the sun board cable, light source work.

⒊ the main pole when lifting, pay attention to safety precautions; screws absolutely tight, such as the composition of the angle of the sunset deviation, you need to adjust the direction of its upward direction towards the straight south.

⒋ the battery into the battery box, in accordance with the technical requirements of the connection cable connected to the controller; first take the battery, then load, and then then the sun board; wiring operation must pay attention to the wiring and the controller marked on the terminal can not Wrong, positive and negative polarity can not crash, can not be reversed; otherwise the controller will be damaged.

⒌ debugging system work is normal; release the controller on the solar panel cable, light; connected to the sun board cable, lights off; at the same time carefully observe the controller on the changes in the lights; all belong to normal, box.

Fourth, solar street lights and conventional street lamps comparative analysis

1. Installation contrast

Solar street light installation, do not have a complex line, only a cement base and within 1m to do a battery pit, with galvanized bolts can be fixed. There are complicated operating procedures in the construction of city street lamps. First of all, to support the cable, trenching pipe, pipe threading, backfill and other large number of civil construction, consumption of a lot of manpower, material and financial resources. And finally to debug, in the event of a problem, it caused a lot of consumption.

2. Cost comparison

Solar street lights an investment, long-term benefit, because the line is simple, does not produce maintenance costs, do not produce expensive electricity. 6-7 years to recover the cost, after 3-4 years to save more than 100 million of electricity and maintenance costs. City circuit lights high electricity, line complex, long-term uninterrupted on the line for maintenance. Especially in the case of unstable voltage, sodium lamp is easy to be inevitable, and with the extension of the age, line aging, maintenance costs are increasing year after year.

3. Safe contrast

Solar street lights as a result of the use of 12-24V low voltage, voltage stability, reliable operation, there is no security risks, is the ecological community, the road sector ideal product. City road lights safety risks, people's living environment in the changing circumstances, road reconstruction, landscape engineering construction, power supply is not normal, water gas pipeline cross construction and many other risks.

4. Environmental comparison

Solar street lights for the development and promotion of noble ecological community to add new selling points; sustainable reduction of property management costs, reduce the cost of the owners of the public part of the apportionment. In view of the comparison, the safety of solar lighting without hidden danger, no energy consumption, green, easy installation, automatic maintenance and maintenance of the inherent characteristics of the sale of real estate, municipal construction directly bring the obvious advantages.

5. Life contrast

The life of solar lamps is much higher than that of ordinary electric lighting fixtures, such as the main components of solar lamps ---- 25 years of life of solar modules; low-pressure sodium lamp average life of 18,000 hours; low-pressure high efficiency three primary color energy-saving lamps average Life of 6000 hours; super bright LED average life expectancy of more than 50,000 hours; solar dedicated battery life of 38AH the following 2-5 years; 38-150AH 3-7 years. In accordance with the conventional district in accordance with the local price bureau "by the pure residential building area of a one-time collection of street lights maintenance fee 6 yuan / ㎡" requirement, making the initial investment in general lighting to be higher than the initial investment in solar lighting. In short, a comprehensive comparison of solar energy lamps to save investment characteristics is quite obvious.